Please call our store at TOLL FREE (888) 486-6326 to find great prices on helmets.
Helpful Hint: If you are unsure of the diameter of the tubing on which you'd like to install the highway pegs and don't have a dial at your disposal, here is an easy way to figure it out. You'll need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge of the paper 1" apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you've made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1-1/8", 1-1/4", 1.35", and 1-1/2" until you find one that will fit.
PART APPLICATIONThis item may be used with the following bikes:
|
CUSTOMER REVIEWS (2)
On July 13, 2010
EpicBadass wrote:
Good pegs overall however one of them always seemed to want to stay slightly looser than the other for me. Probably would go with regular ISO pegs and not the dually
On October 27, 2008
CycleDude wrote:
These things are great. They're heavier than I expected. My only complaint is that I waited so long to get them.
|