|
REAR SUSPENSION LOWERING KIT FOR V-STAR 1100 CLASSIC / CUSTOM / SILVERADO / V-STAR 1300
CU04610
|
|
|
|
|
You definitely need a stand to install these. Two long bolts top and bottom, the nuts come off fairly easy but because the bolts come in from the right side means you'll have to detach the coolant reservoir. If you find the bolt hard to budge just lower the bike until the back tire touches the ground, this takes pressure off the bolt and it slides right out. The end product was worth the frustration, that 2.5 inches changed the stance of this beast.
|
|
|
SPOON STYLE LEVERS FOR VSTAR650 & VSTAR1100 CLASSIC 98-UP
KU7419
|
|
|
|
|
|
CRUISER CUSTOM WHEELS FOR YAMAHA MODELS (CHROME-ECLIPSE-FLIPSIDE-TWILIGHT OR BLACK)
RC-YAMAHA
|
|
|
|
|
|
CURVED LAYDOWN LICENSE PLATE WITH FRAME
KU0000
|
|
|
|
|
Only fit after I extended the holes outward left and right about an 1/8th of an inch, and just used the 2 top holes because I didn't feel like drilling a 3rd hole in my fender. The package says VTX but at the online store says it will fit a VStar 1300, probably going to go back to my earlier modified bracket and just use the top portion of the frame.
|
|
|
2.5" AMERICAN CLASSIC STRAIGHTS WITH HARD TIPS FOR V-STAR 1300
501-4025
|
|
|
|
|
Jam up and jelly tight! These things scared the hell out of me when I cranked the engine. Installation time was about 2 hours. I went with these because of the overall length of the bike in the 1st place, to me longer pipes would overshadow those fantastic fenders lines, gives the bike a more "buff" look. Also just added a DM Air Spike filter and what a sight. Lovineveryminuteofit!
|
|
|
FI2000R DIGITAL FUEL PROCESSOR FOR YAMAHA V-STAR 1300 07-14
92-1774
|
|
|
|
|
Its plug play claim holds true, took me about 20 minutes, after I did a system check I went to putting on my new exhaust. The ride home was like I bought a whole new bike.
|
|
|
STAINLESS THROTTLE CABLE PULL FOR YAMAHA V-STAR 1300/TOURER/DELUXE 07-UP
102-90-30015
|
|
|
|
|
|
STAINLESS THROTTLE CABLE PUSH FOR YAMAHA V-STAR 1300/TOURER/DELUXE 07-UP
102-90-40015
|
|
|
|
|
|
BELT GUARD TOP FOR V-STAR 1300 (UPPER)
CU043532
|
|
|
|
|
|
|
BELT GUARD BOTTON FOR V-STAR 1300 07-11
CU043531
|
|
|
|
|
|
REGULATOR COVER FOR V-STAR 1300
CU04303
|
|
|
|
|
|
CHROME MESH RADIATOR GRILLE FOR YAMAHA V-STAR 1300
BI63316
|
|
|
|
|
Easy install
|
|
|
STAINLESS CLUTCH CABLE FOR YAMAHA V-STAR 1300 & TOURER 07 (High Efficiency)
102-90-10015
|
|
|
|
|
|
SMALL BILLET LIGHTS WITH CURVED BEZEL (CHOOSE FINISH/ LENS)
KE-431C-AMBER
|
|
|
|
|
You gotta get the longer bolts if your gonna run them thru the chrome fender strut, and watch out because the edges on the bolts will eat thru to the wire and ground out causing the #10 fuse to blow, then the wire on the left side totally came out. and theres this little nylon/plastic wire that runs inside the light housing itself that if you turn and twist the bezel around it will jack up the system to where you can;t get to the bulb when you need to.
|
|
