RCCOMPCHONDA

PA10070084

6262

GR222SIS

BT-HN2879-1FCH

RA820155

PA06030099

BI16105

MOMSPIRIT750

4411

1-247

Just a touch of bling...

13-410

These install easily and look awesomely wicked, but are a bit small if you're looking for a highly functional mirror. They vibrate slightly at high speeds but past 80 mph are you really looking behind you? ;-)

6240

Like the look & feel of these, install wasn't too difficult but make sure to measure well prior to installing escpecially if running the wires/cables through the bars, would be easy to put the grips on too far and cover the holes.

13-411

These install easily and look awesomely wicked, but are a bit small if you're looking for a highly functional mirror. They vibrate slightly at high speeds but past 80 mph are you really looking behind you? ;-)

1-213

Just extra chrome...I have the V style radiator grill and this compliments it perfectly. It is chromed plastic, but for $10, it's decent. Snaps on the horn, nice and tight but can be removed if needed.

6250

Looks like it came as part of the grips, totally seamless look. Does the job, but doesn't replace cruise control on loooong rides.

06-0640

Much better than the Big Bike cover, is made of metal first off and has a snug fit. Two supersized zip ties also secure it to the driveshaft. This puppy isn't going anywhere.

55-127

Looks nice as long as it stays on the bike. I cleaned the area very well, used the supplied 3M tape. The part fell off the bike during a ride within 2 1/2 months. Spend the extra $10 and get the Cobra one, it secures with zip ties as well.

6249

Simple install & complete the look I was going for. Quality pieces, solid and sturdy.

ACHM2041PVT7C4

I love these things! Stretches your leg stance out quite a bit, but once you get used to it I have found shifting to be easier and I have more confidence in turns. I didn't give it a 5 due to the fact that the instructions are bad (in fact my set didn't come with any) and what was a 3.5 install could have been 2 with good documentation. Overall though, based just on the product they are definitely a 5! Heavy Duty, great chrome and feel perfect.

78107

This is a total eye candy accessory. It just looks cool. The stubs are decent sized and look great, easy install. Take off the seat and it velcros to the fender under the seat and uses the pillon bolt to attach at the rear.

PA35010319

Nice bags. Not the largest or the nicest, but for the price they are a great buy. The back side is hard ABS so you can mount up to the easy brackets & have a very sturdy set-up. The leather is good quality and the lids completely cover the body to create a weather-resistant fit. Velcro for a first closure, the buckles for a second closure mean they don't open unless you want them too. There are eye-lets in the buckle tab to use a padlock to secure the bags. The OEM locks suck, so plan on buying your own locks (about $5 for a good pair of matching key Master locks @ Home Depot).

BI53426

Total eye candy purchase, but it does complete the look if you get the radiator cover.

PA10070090

Added the jet kit when I installed the new pipes on my bike, pretty much a necessity. De-snorkled the airbox as well, all combined made for a huge improvement in low end. The OEM instructions suck, so check out this page for step-by-step install with photos: http://students.uww.edu/kolfftd12/rejet/rejet.htm

EAAROR2

Great add on for saddlebags. Less than a minute to put on or take off the bike. Get the optional handle for them and you can carry the pair like a suitcase when moving your stuff indoors.

BI53420

Looks great and a fairly easy install. Just unbolt the bars and slip it into place. A perfect add-on if you're replacing the bars. Also a great way to cover up the Honda wings if you're looking to de-Honda your scoot.

KU9432

A good power mod if you've already added pipes & jetted the carb. Increases the airflow dramatically, to the point of making the bike run lean until I re-adjusted the carb to match the new intake. There is nothing else that has this hardcore POWER look to it, especially when you throttle up and the butterflies open up to suck down more air.

CPH1100

LOVE these bars! They look and feel awesome. They do change your ride posture quite a bit. I like the chopper feel of them. If you don't want to lean over though, check out the Punisher bars or the t-bars with the 8" rise.

HH68-106

HH-661-116

Adds a whole new look to the rear end, 2 minute install. Only improvement would be if it were metal instead or plastic.

BIH50351BK

Easy install, just remove speedo and seat. Soft leather with very soft felt backing. The pouch twists off quick & easy and is big enough to store a cell phone & wallet. With the pouch off, my tank bag will still stick to the tank even through the leather. Gives the tank a whole new look.

BI53419

This looks awesome on the bike! The install is a bit of a pain for one person, but still only took about 30 minutes including R & R of the old plastic one. It's also made of very solid metal making it more protective than the OEM one was.

2268

Great look & only 10 minutes to install. Definitely a HUGE improvement over factory.

PA18100557

Awesome sound and good look, but to clean up the newly exposed swing arm, the chrome cover is a good idea. Easy 45 minute solo install, don't forget the gaskets.

2269

Great look & only 10 minutes to install. Definitely a HUGE improvement over factory.

55-319

More bling! These just look cool. The tops could have been refined a bit more, but since Honda made a bunch of bolt heads stick out from the fork on the right side, it's understandable. 2 grub screws on each one secure them to the fork nice & tight.

KU8415

Another eye candy purchase. Doesn't do anything for the performance of the Hypercharger, just looks damn cool. 7 colors, a fade effect, flashing with adjustment to flash rate & solid on. People love it. It does make the hypercharger stick out about 3/16" more so I'll be getting a bushing to make my brake pedal stick out a bit more to deal with clearance.

BI53437

Looks awesome and installs in 5 minutes. Is also easily removable if you need to get to the axle bolt.

PA11310649

Very easy to install and the clutch feels 10 times better now...much faster response when starting off at a light and shifting.